! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Electronic precharge

The electronic precharge replaces the classic ohmic load and can be easily flush mounted due to the extremely compact housing made of heat-resistant, thermoplastic material. It is safe in all flush-mounting circumstances due to a heating of merely 35°C higher than the ambient temperature. The electronic precharge is up to 56% cooler than the normal solutions based on resistances (54% energy-saving compared to the classic ohmic load). It has to be connected in parallel to the primary circuit of the load.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Electronic pre-charge

Reference code
09-016-10

This electronic pre-charge can be safely flush-mounted since it does not heat up more than 35°C above the ambient temperature. It is simple to flush mount thanks to an extremely compact housing.

Specification description

Electronic pre-charge

Electronic preload: system that replaces the classic ohmic load. Safe thanks to a heating of only 35°C above the ambient temperature. Up to 56% cooler than normal resistor-based solutions. 54% energy savings compared to classic Ohmic loads. Easy to install due to the compact housing in heat-resistant thermoplast material. To be connected in parallel to the primary circuit of the load. Weight: 0.115Kg. Dimensions: H 65mm x W 48.3mm x D 27.8mm.

  • Ambient temperature: -5 – +40 °C
  • Protection degree: IP65
  • Protection degree: IP65
  • Marking: CE

Related products

Label holder

The label holder is used for labelling, for example, switching material. It can be repositioned at another location and can be combined with all functions and the three series of faceplates (Niko Pure, Niko Intense and Niko Original). The label holder can be positioned left, right, at the bottom or at the top, and remains in position when removing the faceplate, e.g. for paintwork or cleaning.

Protective cap for paintwork

The protective cap is always placed over a mechanism equipped with a finishing set. It is suitable for the Niko Pure, Niko Intense and Niko Original series.

Led lighting elements

The LED lighting element with automatic connection has a signalling function when combined with a single-pole switch, a two-way or intermediate switch, an NO push button or an NO or NC push button. In combination with a two-pole switch, this LED lighting element with automatic connection has a control function.

Favorites ( 0 )