Various

Label holder

The label holder is used for labelling, for example, switching material. It can be repositioned at another location and can be combined with all functions and the three series of faceplates (Niko Pure, Niko Intense and Niko Original). The label holder can be positioned left, right, at the bottom or at the top, and remains in position when removing the faceplate, e.g. for paintwork or cleaning.

Protective cap for paintwork

The protective cap is always placed over a mechanism equipped with a finishing set. It is suitable for the Niko Pure, Niko Intense and Niko Original series.

Led lighting elements

The LED lighting element with automatic connection has a signalling function when combined with a single-pole switch, a two-way or intermediate switch, an NO push button or an NO or NC push button. In combination with a two-pole switch, this LED lighting element with automatic connection has a control function.

Claws

Set of claws, screws and nuts to switch from screw fixing to claw fixing. The set is suitable for 50 bases.

Long claw

Electronic precharge

The electronic precharge replaces the classic ohmic load and can be easily flush mounted due to the extremely compact housing made of heat-resistant, thermoplastic material. It is safe in all flush-mounting circumstances due to a heating of merely 35°C higher than the ambient temperature. The electronic precharge is up to 56% cooler than the normal solutions based on resistances (54% energy-saving compared to the classic ohmic load). It has to be connected in parallel to the primary circuit of the load.

E10 lamps for 6 A push buttons

Surface-mounting boxes

These surface-mounting boxes are suitable for all flush-mounting devices from the Niko Original series (except for the time switches). They are mounted directly on the wall (screws supplied).