! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless mini hand-held transmitter with 1 channel and 4 control buttons

This hand-held transmitter has four independent control buttons and can be used in combination with all Niko receivers. A different function can be assigned to every control button. Visual feedback of the control via an LED. The battery is supplied with the transmitter.

In combination with the Niko Home Control USB RF interface (410-00099), the hand-held transmitter can also be used in Niko Home Control installations.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Mini hand-held RF transmitter with 1 channel and 4 control buttons

Reference code
05-317

This mini transmitter has 4 functional control buttons. You can use it in combination with all Niko receivers. The operation status is indicated with LEDs. The device is especially well suited for the care sector (e.g. alarm function) or in homes. The battery is supplied with the transmitter.

Technical characteristics:

  • power supply voltage: battery, 3V DC (supplied);
  • transmission range: max. 30 meters indoors, 100 meters in open spaces;
  • dimensions: L62xW37xD11mm
  • frequenty band: 868,0 – 868,6MHz
  • maximum power output: 0,60 dBm

Specification description

Mini hand-held RF transmitter with 1 channel and 4 control buttons

Mini hand-held RF transmitter with 1 channel and 4 control buttons

Mini transmitter with RF technology for wireless remote control of Niko RF receivers on frequency 868.3MHz. Four channels. Each channel can control one or more Niko RF receivers. Dimensions: 62 x 37 x 11mm. Red LED: indication of operation and check for the battery. Max. transmission range in a building 30 m; in open field: 100 m. Modulation type: FSK. Battery type: 3V CR2032. In accordance with Belgian and European legislation: CE marked. This product complies with all applicable European directives and regulations. For radio equipment, Niko nv declares that it complies with Directive 2014/53/EU. May be used in all European member states. Manual is included.

  • Possible to communicate with the connected controller by connecting the USB RF interface (410-00099) to a free USB port of the connected controller
  • Not compatible with the wireless bridge (550-00640)
  • Communication protocol: Easywave®
  • Weight: 28 g
  • Dimensions (HxWxD): 61.6 x 37.2 x 10.9 mm
  • Marking: CE
  • Communication protocol: Easywave®
  • Weight: 28 g
  • Dimensions (HxWxD): 61.6 x 37.2 x 10.9 mm
  • Marking: CE

Related products

Wireless smart hub for Niko Home Control

The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software.

USB RF interface

The USB RF interface makes it possible to use Niko wireless Easywave controls (with the exception of the remote control 05-312) in the Niko Home Control installation for bus cabling. This allows wireless controls to be installed: • on surfaces unsuited to cabling (e.g. glass or concrete partitions) • for the renovation of heritage-listed buildings • for expansions of existing installations where drilling or channelling work is not permitted • in office areas with movable partition walls • when complex cabling is to be avoided. The interface is shaped like a USB stick and can be connected to the connected controller (550-0000x) in the electrical cabinet, using the provided extension cable (3 m). The end of the extension cable is fitted with an assembly ring allowing the antennae to be attached to the outside of the electrical cabinet for optimal reception.

Connected controller for Niko Home Control II

The connected controller is the central module of every Niko Home Control installation for bus wiring. This module contains firmware that can only be programmed with the Niko Home Control programming software 2.1.1 or higher. It covers all basic functions on which a Niko Home Control installation is built. The basic functions include: • The intelligence directing the logic to the installation. Through the configuration software, the logic is saved locally on the controller. • The power supply module providing an input voltage of 26 V to the bus, the cabinet modules and the controls. Depending on the size of the installation, separate power supply modules can be added. • The connection to Niko Home Control IP devices such as touchscreens and external video units. A built-in router allows the user to connect up to 3 devices directly to the controller. With an extra switch, this number can be increased. • The connection to the internet. This enables the user to control the installation both indoors and outdoors (via mobile networks such as 3G, 4G, GPRS or Wi-Fi hotspot) using mobile devices (smartphones and tablets with iOS or Android). The module has a TEST button to verify the proper functioning and status of all other modules. The SERVICE button allows you to perform waiting Niko upgrades. Each installation must consist of one connected controller. After registration on https://mynikohomecontrol.niko.eu, your installation is connected, enabling control through the app via your smartphone and tablet, and you can enjoy the Niko services for upgrade or diagnosis of the installation.

Favorites ( 0 )