! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Outdoor motion detector, 180°, Niko Home Control, 13 m, with orientable lens, black

This motion detector is suitable for use on driveways, on outdoor patios, in garden areas or in garages. The detector is equipped with an integrated light sensor. The sensor can be rotated horizontally within a 25° angle to modify the direction of detection. If you do not want the motion detector to detect any motion within a certain section of the detection area, you cover the sensor lens using the cover cap supplied. Niko Home Control supplies power to the motion detector. No additional power supply is required.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Outdoor motion detector 180°, 13 m, Niko Home Control, with orientable lens, (black)

Reference code
550-20201

This motion detector is suitable for outdoor use, for example, along the driveway, on the terrace or in the garden. It is also equipped with a built-in light sensor. You aim the motion detector wherever you wish and partition the detection area using a cover mask. The Niko Home Control system supplies power to the device. Finishing colour: black

Specification description

Outdoor motion detector 180°, 13 m, Niko Home Control, with orientable lens, (black). The outdoor motion detector detects moving heat sources and activates or deactivates Niko Home Control functions. Outdoor motion detectors are typically used near driveways, outdoor patios, garden areas and garages. The outdoor motion detector detects motion by using Passive Infrared Technology (PIR). It also includes an integrated light sensor. You can change the settings of the outdoor motion detector via the module itself to activate or deactivate Niko Home Control functions during the day, in the evening or during the night. These functions are assigned while programming the installation by linking functions to the unique address of each outdoor motion detector. To attach the motion detector to a ceiling, a mounting brace is required. This is available separately (390-20050). The potentiometers underneath the cover can be used for changing the light sensitivity, switch-off delay and detection range. To change these settings, simply open the cover and use a screwdriver to turn each potentiometer to the desired setting. The detection area can be divided by means of an adjustable cover mask.

  • Input voltage: 26 Vdc (SELV, safety extra-low voltage)
  • Light intensity range: 5 lux – , ∞
  • Switch-off delay: 8 s – 30 min
  • Detection angle: 180 °
  • Detection range (PIR): up to 13 m in diameter from a height of 3 m
  • Ambient temperature: -20 – 45 °C
  • Mounting method: surface mounting
  • Mounting height: 2,5 m
  • Dimensions (HxWxD): 70 x 90 x 130 mm
  • Weight: 165 g
  • Protection degree: IP54
  • Marking: CE

Accessories

Mounting brace for outdoor motion detector (Black)

Reference code
390-20150

You can fasten an outdoor motion detector to a wall or partition with this mounting bracket (black).

Specification description

Niko mounting bracket for ceiling mounting of Niko outdoor motion detector 350-200050. Coulour: black.

Related products

Connected controller for Niko Home Control II

The connected controller is the central module of every Niko Home Control installation for bus wiring. This module contains firmware that can only be programmed with the Niko Home Control programming software 2.1.1 or higher. It covers all basic functions on which a Niko Home Control installation is built. The basic functions include: • The intelligence directing the logic to the installation. Through the configuration software, the logic is saved locally on the controller. • The power supply module providing an input voltage of 26 V to the bus, the cabinet modules and the controls. Depending on the size of the installation, separate power supply modules can be added. • The connection to Niko Home Control IP devices such as touchscreens and external video units. A built-in router allows the user to connect up to 3 devices directly to the controller. With an extra switch, this number can be increased. • The connection to the internet. This enables the user to control the installation both indoors and outdoors (via mobile networks such as 3G, 4G, GPRS or WiFi hotspot) using mobile devices (smartphones and tablets with iOS or Android). The module has a TEST button to verify the proper functioning and status of all other modules. The SERVICE button allows you to perform waiting Niko upgrades. Each installation must consist of one connected controller. After registration on https://mynikohomecontrol.niko.eu, your installation is connected, enabling control through the app via your smartphone and tablet, and you can enjoy the Niko services for upgrade or diagnosis of the installation.

Touchswitch, connected customisable control screen for Niko Home Control, 24 V

Touchswitch is a completely customisable control screen for Niko Home Control with an extremely user-friendly interface featuring clear symbols. The screen is automatically activated when your hand comes near. That way, you can switch or dim your lights, set moods, set ventilation modes, adjust blinds and sun blinds to the desired position, in one operation. In short, all possible Niko Home Control control types are available. Do you have a Niko Home Control thermostat (ref. 550-13050)? Then you can easily set the temperature with the touchswitch. With the Niko Home app not only can you choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the app store or play store. The screen can be easily mounted in any standard flush-mounting box and is powered by a separate 24V DC supply (e.g. 340-00050) The screen communicates via your wireless home network with the rest of your Niko Home Control system. You need an active internet connection to activate the screen. This internet connection ensures that your screen and Niko Home Control installation are always up-to-date, and have the most recent functionalities.

Power supply

The power supply, in combination with the connected controller, provides an extra input voltage of 26 V to the bus, modules and controls. An extra power supply is only necessary in installations for which the power of the built-in power supply of the connected controller is insufficient. Up to 2 extra power supplies can be connected to installations with a connected controller. The MASTER button is not used, as the built-in power supply of the connected controller is always the master. For more information on the required number of power supplies, you can consult the installation manual.

Favorites ( 0 )