! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Eco-display

The eco-display allows the resident to monitor the energy, gas and water consumption as well as the energy production (if applicable). It can also be used to activate the eco-function (all off) or the presence simulation. The eco-display shows information on the electricity, gas and water consumption as well as the electricity production. The type of information displayed will depend on the measuring modules you will install. The electricity measuring module measures the electricity consumption or electricity production. The pulse counter communicates the electricity, gas and water consumption. The current electricity consumption is expressed in W or kW, while gas and water consumption is expressed in m³. The consumption for that week expressed in EUR, GBP or SEK is displayed underneath. The end-user can press the eco-button to switch off all lights and connected circuits when leaving the house. He will immediately notice the reduction in consumption. The resident will activate the presence simulation by pressing the presence simulation button. This allows the resident to have the lights switch on at certain times and to create an extra feeling of safety while using the least amount of energy.

The recommended location for mounting the eco-display is near the door used by the resident to leave the house.

This Niko Home Control eco-display was awarded the Red Dot Design Award 2011.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Ecodisplay Niko Home Control

Reference code
550-13080

The eco display is equipped with an illuminated colour display and has three functions: it displays the energy consumption and production, it can activate the ""all off"" function, and it can start the presence simulation function. Depending on the metering modules present, the consumption and production of electricity as well as the gas and water consumption are indicated on the display. With one push of the eco button, you switch all light and circuits off when you leave the house. By pushing a different button, you start the presence simulation, which works by utilizing energy efficient lighting. In this way, you create extra security with a minimum of energy. This control is mounted in a flush-mounting box at a height of 140 to 150 cm above the surface of the floor. It is best to mount the display at the place where you exit the house.

Ecodisplay Niko Home Control

Reference code
550-13082

The eco display is equipped with an illuminated colour display and has three functions: it displays the energy consumption and production, it can activate the ""all off"" function, and it can start the presence simulation function. Depending on the metering modules present, the consumption and production of electricity as well as the gas and water consumption are indicated on the display. With one push of the eco button, you switch all light and circuits off when you leave the house. By pushing a different button, you start the presence simulation, which works by utilizing energy efficient lighting. In this way, you create extra security with a minimum of energy. This control is mounted in a flush-mounting box at a height of 140 to 150 cm above the surface of the floor. It is best to mount the display at the place where you exit the house.

Ecodisplay Niko Home Control

Reference code
550-13081

The eco display is equipped with an illuminated colour display and has three functions: it displays the energy consumption and production, it can activate the ""all off"" function, and it can start the presence simulation function. Depending on the metering modules present, the consumption and production of electricity as well as the gas and water consumption are indicated on the display. With one push of the eco button, you switch all light and circuits off when you leave the house. By pushing a different button, you start the presence simulation, which works by utilizing energy efficient lighting. In this way, you create extra security with a minimum of energy. This control is mounted in a flush-mounting box at a height of 140 to 150 cm above the surface of the floor. It is best to mount the display at the place where you exit the house.

Related products

Single flush surround plate

Connected controller for Niko Home Control II

The connected controller is the central module of every Niko Home Control installation for bus wiring. This module contains firmware that can only be programmed with the Niko Home Control programming software 2.1.1 or higher. It covers all basic functions on which a Niko Home Control installation is built. The basic functions include: • The intelligence directing the logic to the installation. Through the configuration software, the logic is saved locally on the controller. • The power supply module providing an input voltage of 26 V to the bus, the cabinet modules and the controls. Depending on the size of the installation, separate power supply modules can be added. • The connection to Niko Home Control IP devices such as touchscreens and external video units. A built-in router allows the user to connect up to 3 devices directly to the controller. With an extra switch, this number can be increased. • The connection to the internet. This enables the user to control the installation both indoors and outdoors (via mobile networks such as 3G, 4G, GPRS or WiFi hotspot) using mobile devices (smartphones and tablets with iOS or Android). The module has a TEST button to verify the proper functioning and status of all other modules. The SERVICE button allows you to perform waiting Niko upgrades. Each installation must consist of one connected controller. After registration on https://mynikohomecontrol.niko.eu, your installation is connected, enabling control through the app via your smartphone and tablet, and you can enjoy the Niko services for upgrade or diagnosis of the installation.

Digital black, connected customisable control screen for Niko Home Control, 24 V

Digital black is a completely customisable control screen for Niko Home Control with an extremely user-friendly interface featuring clear symbols. The screen is automatically activated when your hand comes near. That way, you can switch or dim your lights, set moods, set ventilation modes, adjust blinds and sun blinds to the desired position, in one operation. In short, all possible Niko Home Control control types are available. As this Digital black 24V variant is equipped with a temperature sensor and algorithm, it can be programmed as a zone-thermostat when linked to a Niko Home Control heating cooling module (ref. 550-00150) or switching module (ref. 550-00103 or 550-00106) programmed for electrical heating. Do you have a Niko Home Control thermostat (550-1305x)? Then you can easily set the temperature with the Digital black. When the Digital black is used as a thermostat, you define the set points and week programs in the Niko Home app. With the Niko Home app not only can you choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the app store or play store. The screen can be easily mounted in any standard flush-mounting box and is powered by a separate 24V DC supply (e.g. 340-00050). The screen communicates via your wireless home network with the rest of your Niko Home Control system. You need an active internet connection to activate the screen. This internet connection ensures that your screen and Niko Home Control installation are always up-to-date, and have the most recent functionalities. The screen can be easily mounted in any standard flush-mounting box using the familiar claw or screw fixing, and is powered by a separate 24V DC supply. The screen communicates via your wireless home network with the rest of your Niko Home Control system. You need an active internet connection to activate and register the screen. This internet connection ensures that your screen and Niko Home Control installation are always up-to-date, and have the most recent functionalities.

Favorites ( 0 )