Wireless mini transmitter interface
The wireless transmitter interface for push buttons or switches converts the push-button or switching contacts into a wireless telegram:
- When connecting up to four push buttons: the wireless telegram is being sent as long as the push button is pressed (max. 10 s).
- When connecting up to two switches: the wireless telegram will be sent as soon as the contact is closed. When the contact is opened, a new telegram is sent. Any programming can be assigned when closing or opening the contact.
In combination with the Niko Home Control USB RF interface (410-00099), the hand-held transmitter can also be used in Niko Home Control installations.
Product details
Mini RF interface for push buttons or switches, incl. battery
This interface converts the push button or switch contacts to a radio frequency telegram (RF telegram). You can couple a maximum of 4 push buttons to the interface. The device sends an RF telegram as long as the button is pressed and held down (max. 10s). You can connect a maximum of 2 switches. When the contact closes? Then the device sends an RF telegram. When the contact opens again? Then another telegram is sent. You choose which program you assign to a contact.
Technical characteristics:
- power supply voltage: battery, 3V DC (supplied);
- dimensions: L37xB30xH9.8 mm.
Specification description
Mini RF interface for push buttons or switches, incl. battery
Mini RF interface for push buttons or switches, incl. battery
Push-button/switch interface for flush mounting with RF technology for the wireless remote control for Niko RF receivers on frequency 868.3MHz. Converts external NO contacts or bistable contacts into an RF signal. 4 inputs for push buttons or 2 inputs for switches. Dimensions: 30 x 28 x 9mm. max. transmission range in a building 30 m; in open field: 100 m. Modulation type: FSK. Battery type: 3V CR2032. In accordance with the Belgian and European legislation: CE marked. This product complies with all applicable European directives and regulations. For radio equipment, Niko nv declares that it complies with Directive 2014/53/EU. Can be used in all European member states. Manual is included.
- Possible to communicate with the connected controller by connecting the USB RF interface (410-00099) to a free USB port of the connected controller
- Not compatible with the wireless bridge (550-00640)
- Communication protocol: Easywave®
- Weight: 15 g
- Dimensions (HxWxD): 37 x 30 x 9.8 mm
- Marking: CE
- Communication protocol: Easywave®
- Weight: 15 g
- Dimensions (HxWxD): 37 x 30 x 9.8 mm
- Marking: CE
Related products
Wireless smart hub for Niko Home Control
The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software.
USB RF interface
The USB RF interface makes it possible to use Niko wireless Easywave controls (with the exception of the remote control 05-312) in the Niko Home Control installation for bus cabling. This allows wireless controls to be installed: • on surfaces unsuited to cabling (e.g. glass or concrete partitions) • for the renovation of heritage-listed buildings • for expansions of existing installations where drilling or channelling work is not permitted • in office areas with movable partition walls • when complex cabling is to be avoided. The interface is shaped like a USB stick and can be connected to the connected controller (550-0000x) in the electrical cabinet, using the provided extension cable (3 m). The end of the extension cable is fitted with an assembly ring allowing the antennae to be attached to the outside of the electrical cabinet for optimal reception.
Connected switching socket outlet for Niko Home Control with pin earthing and shutters, Zigbee®
With this connected switching socket outlet with built-in consumption measurement, you choose extra comfort, peace of mind and energy awareness. The socket outlet can be perfectly installed in all new construction projects and can also easily replace an existing socket outlet in renovation projects (provided that appropriate wall mounting boxes are present) without adapting the wiring or circuit breakers. You connect the socket outlet without additional wiring with a wireless switch and the wireless smart hub (552-00001) for Niko Home Control. That way you have full control over your socket outlets and you can easily create useful new functionalities, including all-off or all-on and panic functions, routines, calendar and scheduling functions, remote control via the app, insight in your energy consumption, consumption warnings on your smartphone, starting automatic actions when a consumption energy level is exceeded ... This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
