Ferromagnetic 35 W transformer with terminal connections
This ferromagnetic transformer (35 W) is used for the connection of low-voltage loads (12 V - SELV). Both the primary and the secondary side of the transformer are equipped with two screw terminals for wire with a diameter of 6 mm². CE marking; CEBEC and ENEC approved.
Product details
Ferromagnetic 35 W transformer with terminal connection at primary and secondary side
This ferromagnetic transformer has a capacity of 35W. It is suitable for use with low-voltage loads (12 V LED). These lamps can then be dimmed with phase control and universal dimmers. The transformer has two screw terminals for connection, at both primary and secondary side. This transformer is also suitable for flush-mounting in furniture. It is equipped with an integrated thermal protection and an integrated protection against short-circuit, overload and overheating. The transformer has an IP20 protection degree.
Specification description
Ferromagnetic 35 W transformer with terminal connection at primary and secondary side
- Function: ferromagnetic transformer
- Input voltage: 230 Vac ± 10 %, 50 Hz
- Dimensions (HxWxD): 36 x 182 x 41 mm
- Primary wire connection: double primary terminal connection: 1 x 6 mm² per screw terminal
- Secondary wire connection: double secondary terminal connection: 2 x 6 mm² per screw terminal
- Number of exits (pairs): 1
- Output voltage: 11.5 Vac, 50-60 Hz
- Maximum load: 35 W
- Application: suitable for flush-mounting in furniture
- Mounting method: flush-mounting
- Safety protections: resettable protection against overload and overheating (interrupt the voltage to reactivate protection)
- Protection degree: IP20
- Protection class: Class III device: SELV (safety extra low voltage), suitable as a power supply for class III loads
- Finishing colour: black
- Material upperframe: plastic
- Certification marks: ENEC
- Marking: CE
- Weight: 1000 g
Related products
Electronic 70 W transformer, terminal PRI and SEC
This universal dimmable electronic transformer (70 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. Two loads can be easily connected to the two secondary outputs, and the two primary inputs make interconnection easy (max. 8x). CE marking, CEBEC and ENEC approved.
Electronic 105 W transformer, terminal PRI and sec
This universal dimmable electronic transformer (105 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Two loads can be connected to the two secondary outputs. The two primary inputs make interconnection easy (max. 8x). CE marking, CEBEC and ENEC approved.
Electronic 150 W transformer, terminal PRI and sec
This universal dimmable electronic transformer (150 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Up to four loads (4 x 35 W or 3 x 50 W) can be easily connected to the 4 secondary outputs. The 2 primary inputs make interconnection easy (max. 8 times). CE marking; CEBEC and ENEC approved.
