! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Ferromagnetic 150 W block transformer (terminal connections)

This ferromagnetic transformer (150 W) is used for the connection of low-voltage loads (12 V - SELV). On the primary side, the transformer is equipped with two screw terminals and on the secondary side with four screw terminals for wire with a diameter of 4 mm². Incl. attachment brackets. CE marking. Complies with the EN 61558-2-6 safety standard.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Ferromagnetic 150W block transformer (with terminal connections)

Reference code
320-00004

This block transformer has a capacity of 150W. It is suitable for use with low-voltage loads (12 V LED). These lamps can then be dimmed with phase control and universal dimmers. The transformer is connected using two screw terminals at primary side and four screw terminals at secondary side. It has an IP20 protection degree. The attachment brackets are supplied.

Specification description

Ferromagnetic 150W block transformer (with terminal connections)

  • Function: ferromagnetic transformer
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Dimensions (HxWxD): 133 x 95 x 80 mm
  • Primary wire connection: double primary terminal connection: 1 x 4 mm² per screw terminal
  • Secondary wire connection: Fourfold secondary terminal connection: 4 x 4 mm² per screw terminal
  • Number of exits (pairs): 2
  • Output voltage: 11.6 Vac
  • Maximum load: 150 W
  • Mounting method: surface mounting
  • Protection degree: IP20
  • Protection class: Class III device: SELV (safety extra low voltage), suitable as a power supply for class III loads
  • Finishing colour: black
  • Material upperframe: plastic
  • Marking: CE
  • Weight: 2700 g

Related products

Electronic 70 W transformer, terminal PRI and SEC

This universal dimmable electronic transformer (70 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. Two loads can be easily connected to the two secondary outputs, and the two primary inputs make interconnection easy (max. 8x). CE marking, CEBEC and ENEC approved.

Electronic 105 W transformer, terminal PRI and sec

This universal dimmable electronic transformer (105 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Two loads can be connected to the two secondary outputs. The two primary inputs make interconnection easy (max. 8x). CE marking, CEBEC and ENEC approved.

Electronic 150 W transformer, terminal PRI and sec

This universal dimmable electronic transformer (150 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Up to four loads (4 x 35 W or 3 x 50 W) can be easily connected to the 4 secondary outputs. The 2 primary inputs make interconnection easy (max. 8 times). CE marking; CEBEC and ENEC approved.

Favorites ( 0 )