! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Electronic 150 W transformer, wire PRI and SEC, IP65

This universal dimmable electronic transformer (150 W) is used for the connection of low-voltage halogen loads (12 V - SELV). The transformer has an IP65 protection degree, is dustfree and jetproof. It is exceptionally suitable for installation in damp rooms such as bathrooms and kitchens. The cables are fixed with resin. On the primary side, the transformer is equipped with a rubber cable. This cable can be connected to a mini-connection box , which guarantees a quick and correct connection. The silicone wire on the secondary side is directly connected with a spot light. CE marking and ENEC approved.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Electronic 150 W transformer, IP65, incl. rubber insulated wires on the primary side

Reference code
320-00124

This electronic transformer has a capacity of 150W and is universally dimmable. It is suitable for the connection of low-voltage loads (12 V). For a quick and correct connection, you connect the cable on the primary side to a Niko mini-connection box . The silicon wire on the secondary side can be directly connected to a spotlight. This transformer is also suitable for flush mounting in furniture. It is equipped with built-in short-circuit, overload and overheating protection. The transformer has an IP65 protection degree.

Specification description

Electronic 150 W transformer, IP65, incl. rubber insulated wires on the primary side

  • Efficiency in full load: 93 %
  • Not intended to operate in no-load mode
  • Function: electronic transformer
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Dimensions (HxWxD): 113 x 52 x 32 mm
  • Primary wire connection: with rubber insulated cable: 2 x 1 mm², length 50 cm
  • Secondary wire connection: with silicon-insulated wire (170 °C): 2 x 0.75 mm², length 30 cm
  • Number of exits (pairs): 1
  • Maximum wire length secondary connection: 2 m
  • Output voltage: 11.5 Vac, 35 kHz
  • Minimum load: 35 W
  • Maximum load: 150 W
  • Maximum housing temperature (Tc): 80 °C
  • Minimum free space in false ceiling: 100 mm
  • Application: suitable for flush-mounting in furniture
  • Mounting method: flush-mounting
  • Safety protections: self-resetting, built-in protection against short-circuit, overload and overheating
  • Fire safety
    • self-extinguishing: complies with a filament test of 850 °C
    • suitable for normal combustible surfaces
  • Protection degree: IP65
  • Protection class: Class III device: SELV (safety extra low voltage), suitable as a power supply for class III loads
  • Finishing colour: white
  • Material upperframe: plastic
  • Certification marks: ENEC
  • Marking: CE
  • Weight: 317 g

Related products

Electronic 70 W transformer, terminal PRI and SEC

This universal dimmable electronic transformer (70 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. Two loads can be easily connected to the two secondary outputs, and the two primary inputs make interconnection easy (max. 8x). CE marking, CEBEC and ENEC approved.

Electronic 105 W transformer, terminal PRI and sec

This universal dimmable electronic transformer (105 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Two loads can be connected to the two secondary outputs. The two primary inputs make interconnection easy (max. 8x). CE marking, CEBEC and ENEC approved.

Electronic 150 W transformer, terminal PRI and sec

This universal dimmable electronic transformer (150 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Up to four loads (4 x 35 W or 3 x 50 W) can be easily connected to the 4 secondary outputs. The 2 primary inputs make interconnection easy (max. 8 times). CE marking; CEBEC and ENEC approved.

Favorites ( 0 )