! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Electronic 150 W transformer, plug PRI and wire sec

This universal dimmable electronic transformer (150 W) is used for the connection of low-voltage halogen lamps (12 V - SELV). Thanks to the euro plug, this transformer can be very easily connected to a socket outlet. The silicone wire on the secondary side is directly connected with a spot light. CE marking and ENEC approved.

Replaces Niko article: 320-00113

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Electronic 150W-transformer with euro plug on the primary side

Reference code
320-00125

This electronic transformer has a capacity of 150W and is universally dimmable. It is suitable for the connection of low-voltage halogen lamps (12V). On the primary side, the transformer is equipped with a Euro plug that can be directly connected to a socket outlet. The silicon wire on the secondary side can be directly connected to a spotlight. This transformer is also suitable for flush mounting in furniture. It is equipped with built-in short-circuit, overload and overheating protection. The transformer has an IP40 protection degree.

Specification description

Electronic 150W-transformer with euro plug on the primary side. electronic transformer. with phased on and off control and universal dimmers

  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Primary wire connection: double insulated mains lead with Euro plug - 2 x 0.75 mm²; length 2 m
  • Secondary wire connection: with silicon-insulated wire (170 °C): 2 x 0.75 mm², length 30 cm
  • Number of exits (pairs): 1
  • Maximum wire length secondary connection: 2 m
  • Output voltage: 11.5 Vac, 35 kHz
  • Minimum load: 35 W
  • Maximum load: 150 W
  • Maximum ambient temperature: +40 °C
  • Maximum housing temperature (Tc): 80 °C
  • Minimum drill diameter: 55 mm
  • Minimum free space in false ceiling: 100 mm
  • Application: suitable for flush-mounting in furniture
  • Mounting method: flush-mounting
  • Safety protections: self-resetting, built-in protection against short-circuit, overload and overheating
  • The transformer is self-extinguishing (complies with a filament test of 850 °C) and suited to normal combustible surfaces.
  • Protection degree: IP40
  • Protection class: Class II device: SELV (safety extra low voltage), suitable as a power supply for class III fittings
  • Finishing colour: white
  • Material upperframe: plastic
  • Certification marks: ENEC
  • Marking: CE

Related products

Electronic 70 W transformer, terminal PRI and SEC

This universal dimmable electronic transformer (70 W) is used for the connection of low-voltage halogen lamps (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. Two loads can be easily connected to the two secondary outputs, and the two primary inputs make interconnection easy (max. 8x). CE marking, CEBEC and ENEC approved.

Electronic 105 W transformer, terminal PRI and sec

This universal dimmable electronic transformer (105 W) is used for the connection of low-voltage halogen lamps (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Two loads can be connected to the two secondary outputs. The two primary inputs make interconnection easy (max. 8x). CE marking, CEBEC and ENEC approved.

Electronic 150 W transformer, terminal PRI and sec

This universal dimmable electronic transformer (150 W) is used for the connection of low-voltage halogen lamps (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Up to four loads (4 x 35 W or 3 x 50 W) can be easily connected to the 4 secondary outputs. The 2 primary inputs make interconnection easy (max. 8 times). CE marking; CEBEC and ENEC approved. Replaces Niko article: 320-00105

Favorites ( 0 )