Compact electronic 105 W transformer, wire PRI and SEC
This universal dimmable electronic transformer (105 W) is used for the connection of low-voltage loads (12 V – SELV). On the primary side, the transformer is equipped with a double insulated wire. This wire can be connected to a mini connection box which guarantees a quick and correct connection. The silicon wire on the secondary side can be directly connected to a spotlight. Both wires are on the side of the transformer for an easy installation. This transformer is very compact and therefore highly suitable for installations in small spaces.
Product details
Compact, (non-cast) 105 W electronic transformer with wire connections on the primary and secondary sides
Available until January 2024
This compact, electronic transformer has a capacity of 105 W and is universally dimmable. It is suitable for the connection of low-voltage loads (12 V). For a quick and correct connection, you connect the cable on the primary side to a Niko mini-connection box . The silicon wire on the secondary side can be directly connected to a spotlight. Both wires exit the transformer on the side, which makes easy installation possible. This transformer is extremely compact and therefore is used for connections is small spaces (hole diameter, 38 mm). This transformer is also suitable for flush mounting in furniture. It is equipped with built-in short-circuit, overload and overheating protection. The transformer has an IP20 protection degree.
Specification description
Compact, (non-cast) 105 W electronic transformer with wire connections on the primary and secondary sides
- Efficiency in full load: 95 %
- Not intended to operate in no-load mode
- Function: electronic transformer
- Input voltage: 230 Vac ± 10 %, 50 Hz
- Dimensions (HxWxD): 32 x 103 x 29 mm
- Primary wire connection: double insulated mains lead with cord end terminals: 2 x 0.75 mm², length 30 cm
- Secondary wire connection: with silicon-insulated wire (170 °C): 2 x 0.75 mm², length 30 cm
- Number of exits (pairs): 1
- Maximum wire length secondary connection: 2 m
- Output voltage: 11.5 Vac, 50-60 Hz
- Minimum load: 35 W
- Maximum load: 105 W
- Maximum housing temperature (Tc): 75 °C
- Application: suitable for flush-mounting in furniture
- Mounting method: flush-mounting
- Safety protections: self-resetting, built-in protection against short-circuit, overload and overheating
- Fire safety
- self-extinguishing: complies with a filament test of 850 °C
- suitable for normal combustible surfaces
- Protection degree: IP20
- Protection class: Class III device: SELV (safety extra low voltage), suitable as a power supply for class III loads
- Finishing colour: white
- Material upperframe: plastic
- Certification marks: ENEC
- Marking: CE
- Weight: 123 g
Related products
Electronic 70 W transformer, terminal PRI and SEC
This universal dimmable electronic transformer (70 W) is used for the connection of low-voltage loads (12 V – SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. Two loads can be easily connected to the two secondary outputs, and the two primary inputs make interconnection easy (max. 8x).
Electronic 105 W transformer, terminal PRI and sec
This universal dimmable electronic transformer (105 W) is used for the connection of low-voltage loads (12 V – SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Two loads can be connected to the two secondary outputs. The two primary inputs make interconnection easy (max. 8x).
Electronic 150 W transformer, terminal PRI and sec
This universal dimmable electronic transformer (150 W) is used for the connection of low-voltage loads (12 V – SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Up to four loads (4 x 35 W or 3 x 50 W) can be easily connected to the 4 secondary outputs. The 2 primary inputs make interconnection easy (max. 8 times).
