! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Modular wireless dim receiver

The dim receiver for DIN rail mounting is provided with two channels and a connector for the external antenna (05-309). Wireless transmitters can be connected to this receiver. Each channel consists of an NO contact (4 A/230 V) and a control output 1-10 V (45 mA). Electronic ballasts of dimmers (05-715, 65-410) can be directly controlled with a current signal 1-10 V in accordance with the EN60929 standard. In addition to the conventional dimming from 0 to 100%, it is also possible to activate a preset dimming level or an atmosphere.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Modular RF dim controller receiver

Reference code

This dim controller receiver for DIN-rail mounting is controlled wirelessly via radio frequency. It has 2 channels with a 4A/ 230V N.O. contact and a control output of 1-10V 45mA, in accordance with the EN60929 standard. It sends electronic ballasts directly with a 1-10V current signal or dimmers, e.g., 05-715 and 65-410. The device has a connection for an external antenna (05-309) and 9 modes for the functions settings. Depending on the mode chosen, the control occurs via 1, 2 or 4 buttons. With the dim function, you can dim continuously or call up a pre-set atmosphere. You set the operating time to between 0 and 3 seconds and the switch-off time between 0 and 120 minutes.

Technical characteristics:

  • dimensions: 4U.

Specification description

Modular RF dim controller receiver.

Modular dim controller receiver, controlled wirelessly via radio frequency (868.3 MHz). Equipped with two switching contacts of 4 A, 230 V 50 Hz and two independent analog control outputs 1/10V, 45mA. Choose from 9 different modes to determine the function. Maximum 32 transmitters per receiver. max. reception range in a building: 30 m; in open field 100 m. DIN housing dimensions: 4 modules. Power supply: 230 V 50 Hz. Modulation type: FSK. In accordance with Belgian and European legislation: CE marked. This product complies with all applicable European directives and regulations. For radio equipment, Niko nv declares that it complies with Directive 2014/53/EU. May be used in all European member states. Manual is included.

  • Function: modular dimmer
  • Marking: CE

Related products

Rotary dimmer for dimmable LED lamps, 4 – 200 W, 2 wire

Rotary dimmer for dimmable LED lamps in trailing edge. It can also dim incandescent lamps, 230Vac Halogen lamps and low voltage halogen lamps with electronic transformer. 2-wire connected.

Universal rotary dimmer 5 - 325 W, 3 wire

Dimmer for dimmable LED lamps, 230 V halogen lamps, all low-voltage halogen lamps, dimmable economy lamps and incandescent lamps. This dimmer is connected with a 3-wire system.

Rotary button extension, 3 wire

Rotary button extension for the universal rotary dimmer with PLC interference suppression 5 - 325 W, 3 wire.

Favorites ( 0 )