! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50 W per channel for 12 Vdc LED strips and of 100 W per channel for 24 Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in four button mode (article numbers 410-00002 + XXX-90002) for controlling the colour LED strips.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

4-channel constant voltage LED controller, wireless

Reference code
410-00121

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50 W per channel for 12 Vdc LED strips and of 100 W per channel for 24 Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in 4-button mode (410-00002 + XXX-90002) for controlling the colour LED strips.

Specification description

4-channel constant voltage LED controller, wireless

  • Not compatible with the wireless bridge, nor with the wireless smart hub
  • Ambient temperature: +45 °C
  • Protection degree: IP20
  • Dimensions (HxWxD): 176 x 62 x 36 mm
  • Marking: CE

Related products

PWM dimmer, 100 W

The PWM dimmer will be used to dim LED strips with monochrome LEDs, up to a maximum capacity of 100 W. The light intensity is dimmed linearly by using an N.O. push button. Press the N.O. push button briefly for switching on and off, and hold it down for brightening and dimming the light.

DIN rail power supply for LED strips, 24 Vdc, 100 W

The power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety

DIN rail power supply for LED strips, 24 Vdc, 2.5 A/60 W

The 60 W power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable.

Favorites ( 0 )