! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

RGB controller, max. 50 W

The RGB controller will be used to control Niko LED strips with RGB LEDs, up to a maximum capacity of 50 W. In addition to the on/off function, there are two modes that can be selected with an N.O. push button. Press the N.O. push button briefly for running through the different modes (on, fade, fixed colour, off), and hold it down for adjusting the speed of the ‘fade’ mode or the intensity of the ‘fixed colour’ mode.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

RGB controller, 8 - 24 Vdc, max. 50 W

Reference code
340-00110

The RGB controller can be used to control RGB LED strips with a maximum of 50W (corresponds to 10x 340-00101/340-00102). In addition to the ON/OFF function, there are 2 modes available which can be accessed using an N.O. push button.

Specification description

RGB controller, 8 - 24 Vdc, max. 50 W

RGB controller suitable for colour control of RGB LED strips operating on a supply voltage of 8-24 VDC. Maximum load 50 W. Modes; next to switching ON/OFF, you can go through an automatic colour cycle (fade) or select a fixed colour. In “fixed colour” mode, white light is also selectable; in mode “fade” the speed is adjustable between 5 s and 4 h to go through the entire loop.

Operation by means of an N.O. push button; short press to select mode; ON (on solid colour) – fade – OFF; long press to change the set colour (mode “solid colour”) or adjust the speed (mode “fade”). Both settings are stored in memory.

  • Marking: CE

Related products

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50 W per channel for 12 Vdc LED strips and of 100 W per channel for 24 Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in four button mode (article numbers 410-00002 + XXX-90002) for controlling the colour LED strips.

PWM dimmer, 100 W

The PWM dimmer will be used to dim LED strips with monochrome LEDs, up to a maximum capacity of 100 W. The light intensity is dimmed linearly by using an N.O. push button. Press the N.O. push button briefly for switching on and off, and hold it down for brightening and dimming the light.

DIN rail power supply for LED strips, 24 Vdc, 100 W

The power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety

Favorites ( 0 )