! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Power supply for LED strips, 24 Vdc - 60 W - IP67

The 60W power supply is suitable for supplying power to LED strips. This power supply has an IP67 protection degree, is dust-free and waterjet proof. As a result, it is extremely well-suited for installation in a damp room, such as a bathroom or kitchen. The cables are fixed with resin.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Power supply 24 V DC, 60 W, IP67 for LED strips

Reference code
340-00028

This power supply is suitable for powering LEDs of 24 Vdc. It can be dimmed via 1-10 V. Suitable for suppplying monochromatic, tunable white and RGB(W) LED strips.

Specification description

Power supply 24 V DC, 60 W, IP67 for LED strips.

  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Primary wire connection: round, insulated cable (H05-RNF) with cord end terminals: 1 mm², length 50 cm
  • Maximum ambient temperature: +50 °C
  • Safety protections: protected against overload, overheating and short-circuit
  • Protection class: Class II device: SELV (safety extra low voltage), independent device
  • Application: suitable for flush-mounting in furniture
  • Dimensions (HxWxD): 53 x 150 x 35 mm
  • Marking: CE

Related products

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50W per channel for 12Vdc LED strips and of 100W per channel for 24Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in 4-button mode (article numbers 410-00002 + xxx-90002) for controlling the colour LED strips. Replaces 340-00120 & 340-00121

PWM dimmer, 100 W

The PWM dimmer will be used to dim Niko LED strips with monochrome LEDs, up to a maximum capacity of 100 W. The light intensity is dimmed linearly by using an NO push button. Press the NO push button briefly for switching on and off, and hold it down for brightening and dimming the light. Replaces 340-10027 and 340-10028.

Power supply for LED strips, 24 Vdc - 120 W - IP67

The 120 W power supply is suitable for supplying power to LED strips. This power supply has an IP67 protection degree, is dust-free and waterjet proof. As a result, it is extremely well-suited for installation in a damp room, such as a bathroom or kitchen. The cables are fixed with resin.

Favorites ( 0 )