! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Orientation lighting with red LEDs, 460 lux

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Orientation lighting with red LEDs, 460 lux., claw fixing

Reference code
170-38300

Switch for orientation lighting with red LEDs 460 lux, with claw fixing. A faceplate in the colour of your choice must be ordered separately.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Orientation lighting with red LEDs, 460 lux., screw fixing

Reference code
170-38301

Switch for orientation lighting with red LEDs 460 lux, with screw fixing. A faceplate in the colour of your choice must be ordered separately.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Related products

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50 W per channel for 12 Vdc LED strips and of 100 W per channel for 24 Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in four button mode (article numbers 410-00002 + XXX-90002) for controlling the colour LED strips.

PWM dimmer, 100 W

The PWM dimmer will be used to dim LED strips with monochrome LEDs, up to a maximum capacity of 100 W. The light intensity is dimmed linearly by using an N.O. push button. Press the N.O. push button briefly for switching on and off, and hold it down for brightening and dimming the light.

DIN rail power supply for LED strips, 24 Vdc, 100 W

The power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety

Favorites ( 0 )