Motion detector 360°, 230 V, 26 m, for surface mounting, IP55
Description
The motion detector with one channel for surface-mounting on ceilings is suitable for switching indoor lighting on and off. The detector is equipped with an integrated light sensor.
Specification description
Motion detector 360°, 230 V, 26 m, for surface mounting, IP55.
Technical data
- Input voltage: 230 Vac ± 10 %, 50 Hz
- Number of channels: 1 channel
- Light intensity range: 5 lux – 2000 lux
- Switch-off delay: 10 s – 20 min
- Detection angle: 360 °
- Detection range (PIR): up to 26 m in diameter from a height of 8 m
- Ambient temperature: -20 – 55 °C
- Mounting method: surface mounting
- Mounting height: 2 – 8 m
- Relay contact 1: NO (max. µ10 A)
- Maximum load incandescent and halogen lamps (cosφ=1): 2300 W
- Maximum load low voltage halogen lamps: 1150 W
- Maximum load economy lamps (CFLi): 350 W
- Maximum load LED lamps 230 V: 350 W
- Dimensions (HxWxD): 125 x 125 x 75 mm
- Protection degree: IP55
- Protection class: Class II device
- Marking: CE
Related products:
Universal remote control for smartphone
The universal remote control is used for the configuration of detectors via a smartphone app. The Niko Sensor Tool app is used to define settings and configuration and the universal remote control transmits the settings and configuration from the smartphone to the detector wirelessly.
IR remote control
The IR remote control 351-25320 is used to control and configure the following Niko detectors: 351-2500x, 351-2506x, 351-25340, 351-2545x, 351-2546x, 351-2547x, 351-265xx and 350-500111.
IR remote control for users
AUTO: Activate automatic mode • Press this button to activate the automatic mode. ON: Switch on light for 6 hours • Press this button to switch the light on constantly for 6 hours. After that time, the detector resumes its automatic operation. Please note: this button cannot be used if the TIME setting is on pulse. OFF: Switch off light for 6 hours • Press this button to switch the light off completely for 6 hours. After that time, the detector resumes its automatic operation. Please note: this button cannot be used if the TIME setting is on pulse.
