Presence or absence detector, 360°, one channel (10 A), for flush mounting

This 1-channel presence and absence detector is suitable for flush-mounting in the ceiling and is used for switching indoor lighting. This presence detector has a circular detection range of up to 12 m in diameter. The device has a built-in light sensor and switches the lighting on and off automatically. Manual operation is also possible using the N.O. push button (to be ordered separately). After the pre-set time delay, the light is switched off automatically. The device has an IP20 protection degree and conforms to the European directive, EN 60669-2-1, for EMC and safety.

Finishing colour: white.

Presence or absence detector 360°, 230 V, 10 A , one channel, to switch lights on and off (white).

• Factory setting

detector 350-20056

• Input voltage: 230 Vac ± 10 %, 50 Hz
• Number of channels: 1 channel
• Light intensity range: 30 lux – 2000 lux
• Switch-off delay: 5 s – 30 min
• Detection angle: 360 °
• Detection range (PIR): circle, 8 – 12 m
• Ambient temperature: -5 – +50 °C
• Mounting method: flush-mounting or surface-mounting
• Mounting height: 25 – 4 m
• Relay contact 1: NO. (max. 10 A), light- and motion-sensitive
• Maximum load incandescent and halogen lamps (cosφ=1): 2300 W
• Maximum load fluorescent lamps (cosφ ≥ 0,5): 1200 VA
• Maximum load low voltage halogen lamps: 1200 W
• Maximum load economy lamps (CFLi): 350 W
• Maximum load LED lamps 230 V: 350 W
• Maximum capacitive load: 140 µF
• Maximum switching current: 165 A/20 ms – 800 A/200 µs
• Dimensions (HxWxD): 90 x 90 x 56 mm
• Protection degree: IP20
• Protection class: Class II device
• Marking: CE

The universal remote control is used for the configuration of detectors via a smartphone app. The Niko Sensor Tool app is used to define settings and configuration and the universal remote control transmits the settings and configuration from the smartphone to the detector wirelessly.

Universal remote control for smartphone

Flush-mounting box with spring clips for ceiling mounting of detectors

Flush-mounting box with spring clips for 350-20065 and 351-20066

Flush-mounting box for ceiling mounting of detectors. Provided with spring clips for easy mounting in false ceilings.

Mounting box intended for ceiling mounting of 360° presence detector; 1-channel, 10A, for surface mounting on ceilings (350-20056)

Mounting box for 360° presence detector, for surface mounting on ceilings

Niko mounting box for ceiling mounting of the 360° presence detector with one channel (10A, for surface mounting on ceilings) (350-20056). The mounting screws needed to mount the detector to the box are included. The box has a diameter of 89mm and is 42mm high.

This remote control unit is suitable for setting the flush-mounting presence detector 350-20056 using IR technology. The factory settings that can be changed with this unit are the daylight factor (lux value), the length of time that the light remains on etc.

IR remote control unit for setting the flush-mounting presence detector 350-20056

This Niko remote control is used to set up the flush-mounting presence detector (350-20056) using infrared signals. With this device, the factory settings can be changed. The settings that can be changed include the daylight factor (lux value) and the time period during which the light remains on.