! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Presence or absence detector 360°, 230 V, 8 m, 1 channel, for flush-mounting box

The presence or absence detector with one channel and daylight control for flush mounting in ceilings is suitable for switching indoor lighting on and off. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NO push button (230 Vac) (to be ordered separately). In conformity with the European directive for EMC and safety EN60669-2-1.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Presence or absence detector 360°, 230 V, 8 m, 1 channel, for flush-mounting box, white

Reference code
350-20056

This 1-channel presence and absence detector is suitable for flush-mounting in the ceiling and is used for switching indoor lighting. This presence detector has a circular detection range of up to 12 m in diameter. The device has a built-in light sensor and switches the lighting on and off automatically. Manual operation is also possible using the N.O. push button (to be ordered separately). After the pre-set time delay, the light is switched off automatically. The device has an IP20 protection degree and conforms to the European directive, EN 60669-2-1, for EMC and safety.

Finishing colour: white.

Specification description

Presence or absence detector 360°, 230 V, 8 m, 1 channel, for flush-mounting box, white.

  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Detector output: 230 V (ON/OFF)
  • Number of channels: 1 channel
  • Light intensity range: 30 lux – 2000 lux
  • Switch-off delay: 5 s – 30 min
  • Detection angle: 360 °
  • Detection range (PIR): ø 8 – 12 m
  • Ambient temperature: -5 – +50 °C
  • Mounting method: flush-mounting box
  • Mounting height: 2.5 – 4 m
  • Relay contact: N.O. (max. 10 A), light- and motion-sensitive
  • Maximum load incandescent and halogen lamps (cosφ=1): 2300 W
  • Maximum load fluorescent lamps (cosφ ≥ 0.5): 1200 VA
  • Maximum load low voltage halogen lamps: 1200 W
  • Maximum load economy lamps (CFLi): 350 W
  • Maximum load LED lamps 230 V: 350 W
  • Maximum capacitive load: 140 µF
  • Maximum switching current: 165 A/20 ms – 800 A/200 µs
  • Dimensions (HxWxD): 90 x 90 x 56 mm
  • Protection degree: IP20
  • Protection class: Class II device
  • Marking: CE

Accessories

Technical datasheets
Technical manuals
Certificaten CE-Marking

Universal remote control for smartphone

Reference code
350-41936

The universal remote control is used for the configuration of detectors via a smartphone app. The Niko Sensor Tool app is used to define settings and configuration and the universal remote control transmits the settings and configuration from the smartphone to the detector wirelessly.

Compatible articles: 350-20056, 350-20070, 350-20072, 350-20078, 350-20080, 350-20082, 350-20085, 350-41600, 350-41620, 350-41650, 350-41657, 350-41659, 350-41680, 350-41750, 350-41751, 350-41752, 350-41753, 350-41760, 350-41761, 350-41762, 350-41763, 350-41780, 350-41781, 351-25050, 351-25065, 351-25340, 351-25451, 351-25457, 351-25463, 351-25467, 351-25475, 351-26450, 351-26470, 351-26480, 351-26560, 351-26562, 351-26570, 351-26572

Specification description

Universal remote control for smartphone

Technical datasheets
Technical manuals
Certificaten CE-Marking

IR remote control

Reference code
350-20057

This remote control unit is suitable for setting the flush-mounting presence detector using IR technology. The factory settings that can be changed with this unit are the daylight factor (lux value), the length of time that the light remains on etc.

Compatible articles: 350-20056

Specification description

IR remote control

Surface-mounting height= max 8.5 mm. CECEC approved

Technical datasheets
Certificaten CE-Marking

Mounting box for 360° presence detector, for surface mounting

Reference code
390-20056

Mounting box intended for ceiling mounting of 360° presence detector.

Compatible articles: 350-20056

Specification description

Mounting box for 360° presence detector, for surface mounting

Niko mounting box for ceiling mounting of the 360° presence detector (350-20056). The mounting screws needed to mount the detector to the box are included. The box has a diameter of 89mm and is 42mm high.

Technical datasheets
Technical manuals
Certificaten CE-Marking

Flush mounting box with spring clips

Reference code
390-20057

Flush-mounting box with spring clips for ceiling mounting of detectors

Compatible articles: 350-20056, 350-20065, 350-20066, 350-20070, 350-20071

Specification description

Flush mounting box with spring clips

Flush-mounting box for ceiling mounting of detectors. Provided with spring clips for easy mounting in false ceilings.

Related products

Outdoor motion detector 200°, 230 V, 14 m

This outdoor motion detector with a detection range of 14 metres is suitable for use along driveways, under carports or in the garden. The motion detector can be mounted onto the ceiling or the wall and can be aimed upwards, downwards, left and right. The device has a built-in light sensor and switches the lighting automatically. After the pre-set time delay, the light is switched off automatically. The detector can be configured both manually and by remote control.

Outdoor motion detector 180°, 230 V, 16 m, white

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Outdoor motion detector 180°, 230 V, 13 m, black

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Favorites ( 0 )