Presence detector, DALI, master, 14 m, square, for flush-mounting box
Product details
Presence detector, DALI, master, 14 m, square, for flush-mounting box, white
Master presence detector for DALI systems (broadcast). daylight control for 1 zone. Easy to start up via app, remote control or controller. Max. 10 secondary detectors are wired by means of a control cable.
Finishing colour: white
Compatible secondary detectors: 351-25459, 351-25469
Specification description
Presence detector, DALI, master, 14 m, square, for flush-mounting box, white.
- Input voltage: 230 Vac ± 10 %, 50 Hz
- Detector output: DALI Broadcast
- Maximum MCB rating: 10 A (limited by national installation rules)
- Maximum number of dimmable zones: 1
- Light intensity range: 5 lux – 2000 lux
- Switch-off delay: 10 s – 20 min
- Detection angle: 360 °
- Detection range (PIR): ø 14 m from a height of 3 m
- Ambient temperature: 0 – 45 °C
- Mounting method: flush-mounting box
- Mounting height: 2 – 6 m
- Usage: for indoor use only
- Dimensions (HxWxD): 88 x 88 x 71 mm
- Dimensions visible (HxWxD): 88 x 88 x 35 mm
- Protection degree: IP20
- Impact resistance: IK02
- Marking: CE
Related products
Motion detector, 230 V, 12 m, 200°, IP55, for wall and ceiling mounting, for surface mounting
This outdoor motion detector with a detection range of 14 metres is suitable for use along driveways, under carports or in the garden. The motion detector can be mounted onto the ceiling or the wall and can be aimed upwards, downwards, left and right. The device has a built-in light sensor and switches the lighting automatically. After the pre-set time delay, the light is switched off automatically. The detector can be configured both manually and by remote control.
Motion detector, 230 V, 16 m, 180°, IP54, for surface mounting
The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.
Motion detector, 230 V, 13 m, 180°, IP54, for surface mounting
The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.
