! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Motion detector for corridors 360°, 230 V, 40 m, for flush-mounting box

The one channel corridor motion detector is suitable for automatic indoor lighting control (on/off). It can be installed in a flush-mounting box in the ceiling. Flush-mounting box with springs and an IP54 surface-mounting box can be ordered separately. In conformity with the European directive for EMC and safety EN60669-2-1.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Motion detector for corridors 360°, 230 V, 40 m, for flush-mounting box, white

Reference code
350-500111

The one channel corridor motion detector is suitable for automatic indoor lighting control (on/off). It can be installed in a flush-mounting box in the ceiling. A flush-mounting box with spring clips and an IP54 surface-mounting box can be ordered separately. In conformity with the European directive for EMC and safety EN60669-2-1. Finishing colour: white.

Specification description

Motion detector for corridors 360°, 230 V, 40 m, for flush-mounting box, white.

  • Detector technology: PIR
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Detector output: 230 V (ON/OFF)
  • Maximum power consumption: 0.5 W
  • Number of channels: 1 channel
  • Light intensity range: 10 lux – 2000 lux, ∞
  • Switch-off delay: pulse, 30 s – 30 min
  • Activation delay: 1 s
  • Detection angle: 360 °
  • Detection range (PIR): 5 m x 40 m from a height of 2,5 m
  • Ambient temperature: -20 – +40 °C
  • Mounting method: flush-mounting box
  • Mounting height: 2 – 2.5 m
  • Relay contact: N.O. (max. µ10 A)
  • Wire capacity
    • up to 2.5 mm² wire per terminal
  • Maximum load incandescent and halogen lamps (cosφ=1): 2300 W
  • Maximum load fluorescent lamps (cosφ ≥ 0.5): 1200 VA
  • Maximum load low voltage halogen lamps: 1200 W
  • Maximum load economy lamps (CFLi): 800 W
  • Maximum load LED lamps 230 V: 300 W
  • Maximum load LED driver: 800 VA
  • Maximum capacitive load: 140 µF
  • Colour: white (RAL 9010)
  • Dimensions (HxWxD): 105 x 105 x 60 mm
  • Protection degree: IP20
  • Protection class: Class II device
  • Marking: CE

Accessories

Technical datasheets
Certificaten CE-Marking

Flush-mounting box with spring clips

Reference code
350-991999

Compatible articles: 350-100111, 350-500111, 350-530311

Specification description

Flush-mounting box with spring clips

  • Drill diameter: 68 mm
Technical datasheets
Technical manuals
Certificaten CE-Marking

IR remote control

Reference code
351-25320

The IR remote control is used to control and configure Niko detectors.

Compatible articles: 351-25065, 351-26560, 351-26562, 351-25050, 351-25480, 351-25457, 351-25340, 351-26570, 351-26572, 351-25475, 351-25451, 351-26450, 351-26470, 351-26480, 351-25467, 350-500111, 351-25463

Specification description

IR remote control

Technical datasheets
Certificaten CE-Marking

IP54 surface-mounting box, white

Reference code
350-992901

Compatible articles: 350-100111, 350-500111, 350-530311

Specification description

IP54 surface-mounting box, white

Related products

Outdoor motion detector 200°, 230 V, 14 m

This outdoor motion detector with a detection range of 14 metres is suitable for use along driveways, under carports or in the garden. The motion detector can be mounted onto the ceiling or the wall and can be aimed upwards, downwards, left and right. The device has a built-in light sensor and switches the lighting automatically. After the pre-set time delay, the light is switched off automatically. The detector can be configured both manually and by remote control.

Outdoor motion detector 180°, 230 V, 16 m, white

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Outdoor motion detector 180°, 230 V, 13 m, black

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Favorites ( 0 )