Lighting control module, 230 V, 3 lux – 30000 lux
Energy-saving thanks to optimum use of lighting. Modular lighting control to be used in combination with a photocell and motion detector(s). Automatically switching on depending on the measured daylight level and motion detection. Automatically switching off in case of sufficient daylight or after a switch-off delay. Optional control via an N.O. push button (to be ordered separately). Suitable for indoor and outdoor applications.
Product details
Lighting control module, 230 V, 3 lux – 30000 lux
With this device, you can save substantial energy by making optimal use of natural daylight. This modular lighting control is used in combination with a photocell and one or more motion detectors. If there is insufficient daylight and motion is detected, then the lighting is automatically switched on. The lighting is automatically switched back off again when there is sufficient daylight or after the pre-set switch-off delay. Manual control is also possible using the N.O. push button. This lighting control is suitable for indoor and outdoor applications. It has an IP20 protection degree and conforms to the European directive for EMC and safety EN60669-2-1.
Specification description
Lighting control module, 230 V, 3 lux – 30000 lux.
Niko modular lighting control to be used in combination with a Niko photocell and Niko motion detector(s). Automatic activation is dependent on the level of daylight measured and the motion detected. Automatic OFF in sufficient daylight or after switch-off delay. Optional control via N.O. push button. Suitable for indoor and outdoor applications.
- Secondary voltage: 24 Vdc ±10 %.
- DIN 2TU
- Input voltage: 230 Vac/24 Vdc
- Detector output: 230 V (ON/OFF)
- Maximum MCB rating: 10 A (limited by national installation rules)
- Number of channels: 1 channel
- Light intensity range: 3 lux – 30000 lux
- Ambient temperature: 5 – 50 °C
- Relay contact: N.O. (max. 10 A)
- Maximum load incandescent and halogen lamps (cosφ=1): 2300 W
- Maximum load fluorescent lamps (cosφ ≥ 0.5): 1200 VA
- Maximum load low voltage halogen lamps: 500 W
- Maximum capacitive load: 140 µF
- Dimensions (HxWxD): 90 x 35 x 55 mm
- Protection degree: IP20
- Marking: CE
Related products
Motion detector, 230 V, 12 m, 200°, IP55, for wall and ceiling mounting, for surface mounting
This outdoor motion detector with a detection range of 14 metres is suitable for use along driveways, under carports or in the garden. The motion detector can be mounted onto the ceiling or the wall and can be aimed upwards, downwards, left and right. The device has a built-in light sensor and switches the lighting automatically. After the pre-set time delay, the light is switched off automatically. The detector can be configured both manually and by remote control.
Motion detector, 230 V, 16 m, 180°, IP54, for surface mounting
The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.
Motion detector, 230 V, 13 m, 180°, IP54, for surface mounting
The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.
