! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Flat presence or absence detector with 3 zone DALI daylight control and extra functionalities, 360°, 12 m, master or stand-alone, 360°, for flush mounting

Presence detector, DALI daylight control for flush mounting in ceilings of 2.4 - 3m. Stand-alone or as master combinable with a maximum of 10 secondary detectors (350-41659). For use in offices, schools, conference rooms… in large and small spaces. The detector has a maximum of 3 daylight controlled zones, and an extra contact which can be used. It has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. Depending on the chosen application the lighting must always be switched on manually using a push button, and is automatically switched off if there is sufficient daylight or no one is in the room (absence detector). Or the lighting is switched on automatically when movement is registered and there is insufficient daylight. In this case, the lighting is also automatically switched off if there is sufficient daylight or no one is in the room (presence detector). The lighting remains on as long as the detector detects movement and the measured level of daylight is lower than the set value. The switch-off delay, the lux value at which the lighting must switch on and the sensitivity of the detector are easily set with the IR remote control for smartphone (optional)

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Flat presence or absence detector 360°, 12 m, with 3 zone DALI daylight control and extra functionalities, master or stand-alone, for flush mounting

Reference code
350-41650

Presence detector, DALI daylight control for flush-mounting in ceilings of 2.4 - 3m. Standalone or as master combinable with a maximum of 10 slaves (350-41659). For use in offices, schools, conference rooms… in large and small spaces. The detector has a maximum of 3 daylight controlled zones, and an extra contact which can be used. It has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. Depending on the chosen application the lighting must always be switched on manually using a push button, and is automatically switched off if there is sufficient daylight or no one is in the room (absence detector). Or the lighting is switched on automatically when movement is registered and there is insufficient daylight. In this case, the lighting is also automatically switched off if there is sufficient daylight or no one is in the room (presence detector). The lighting remains on as long as the detector detects movement and the measured level of daylight is lower than the set value. The switch-off delay, the lux value at which the lighting must switch on and the sensitivity of the detector are easily set with the IR remote control for smartphone (optional).

Specification description

Flat presence or absence detector 360°, 12 m, with 3 zone DALI daylight control and extra functionalities, master or stand-alone, for flush mounting. IP20

  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Detector output: DALI
  • Light intensity range: 100 lux – 2000 lux
  • Detection angle: 360 °
  • Detection range (PIR): ø 12 m from a height of 3 m
  • Ambient temperature: -5 – +40 °C
  • Mounting method: flush-mounting
  • Drill diameter: 77 mm
  • Mounting height: 24 – 3 m
  • Relay contact 1: NO (max. µ10 A), potential-free
  • Wire capacity
    • up to 2.5 mm² wire per terminal
  • Maximum load incandescent and halogen lamps (cosφ=1): 2300 W
  • Maximum load low voltage halogen lamps: 500 W
  • Maximum load economy lamps (CFLi): 350 W
  • Maximum load LED lamps 230 V: 350 W
  • Maximum load LED driver: 500 VA
  • Maximum load electronic transformer: 500 VA
  • Maximum capacitive load: 140 µF
  • Maximum switching current: 165 A/20 ms – 800 A/200 µs
  • Dimensions (HxWxD): 95 x 95 x 95 mm
  • Protection degree: IP20
  • Marking: CE

Accessories

Technical datasheets
Technical manuals
Certificaten CE-Marking

Universal remote control for smartphone

Reference code
350-41936

The universal remote control is used for the configuration of detectors via a smartphone app. The Niko Sensor Tool app is used to define settings and configuration and the universal remote control transmits the settings and configuration from the smartphone to the detector wirelessly.

Specification description

Universal remote control for smartphone

Technical datasheets
Technical manuals
Certificaten CE-Marking

IR-remote control for users

Reference code
350-41934

Specification description

IR-remote control for users

Technical datasheets
Technical manuals
Certificaten CE-Marking

IR remote control for users

Reference code
350-41935

Specification description

IR remote control for users

Related products

Wall motion detector, 180°, Niko Home Control, 9 m

This motion detector is suitable for indoor use only. Niko Home Control supplies power to the motion detector. No additional power supply is required. To be used as a motion detector or as a motion detector in combination with a photo cell.

Outdoor motion detector, 180°, 230 V, 16 m

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Outdoor motion detector, 180°, 230 V, 13 m, black

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Favorites ( 0 )