! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Flat presence or absence detector with 3 zone DALI daylight control and extra functionalities, 360°, 12 m, master or stand-alone, for flush mounting, with EnOcean

The 360° DALI presence detector is suitable for the control of DALI devices in a maximum of 3 daylight zones. Depending on the incoming daylight, the light intensity of each zone will be adjusted separately. The detector can also control, switch on and off or dim one or two secondary zones (depending on the selected settings). The detector is designed for indoor applications and has an integrated light sensor. It is suitable for use in offices, schools and public buildings and can be used in both large and small rooms. The device also has an integrated relay for controlling either lighting or ventilation (to be ordered separately). The detector is equipped with an integrated EnOcean receiver, enabling wireless control with EnOcean transmitters.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Flat presence or absence detector 360°, 12 m, with 3 zone DALI daylight control and extra functionalities, master or stand-alone, for flush mounting, with EnOcean

Reference code
350-41680

Presence detector, DALI daylight control for flush-mounting in ceilings of 2.4 - 3m. Standalone or as master combinable with a maximum of 10 slaves (350-41659) and can be controlled via EnOcean. For use in offices, schools, conference rooms… in large and small spaces. The detector has a maximum of 3 daylight controlled zones, and an extra contact which can be used. It has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. Depending on the chosen application the lighting must always be switched on manually using a push button, and is automatically switched off if there is sufficient daylight or no one is in the room (absence detector). Or the lighting is switched on automatically when movement is registered and there is insufficient daylight. In this case, the lighting is also automatically switched off if there is sufficient daylight or no one is in the room (presence detector). The lighting remains on as long as the detector detects movement and the measured level of daylight is lower than the set value. The switch-off delay, the lux value at which the lighting must switch on and the sensitivity of the detector are easily set with the IR remote control for smartphone (optional).

Specification description

Flat presence or absence detector 360°, 12 m, with 3 zone DALI daylight control and extra functionalities, master or stand-alone, for flush mounting, with EnOcean. IP20

Technical data

  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Light intensity range: 100 lux – 1000 lux
  • Detection angle: 360 °
  • Detection range (PIR): up to 12 m in diameter from a height of 3 m
  • Ambient temperature: 5 – 40 °C
  • Mounting method: flush-mounting
  • Drill diameter: 77 mm
  • Mounting height: 2.4 – 3 m
  • Relay contact 1: NO (max. µ10 A), potential-free
  • Wire capacity: All connection terminals can contain up to 2.5 mm² of wire.
  • Maximum load incandescent and halogen lamps (cosφ=1): 2300 W
  • Maximum load low voltage halogen lamps: 500 W
  • Maximum load economy lamps (CFLi): 350 W
  • Maximum load LED lamps 230 V: 350 W
  • Maximum load LED driver: 500 VA
  • Maximum load electronic transformer: 500 VA
  • Maximum capacitive load: 140 µF
  • Maximum switching current: 165 A/20 ms – 800 A/200 µs
  • Dimensions (HxWxD): 95 x 95 x 95 mm
  • Protection degree: IP20
  • Marking: CE

Accessories

Universal remote control for smartphone

Reference code
350-41936

The universal remote control is used for the configuration of detectors via a smartphone app. The Niko Sensor Tool app is used to define settings and configuration and the universal remote control transmits the settings and configuration from the smartphone to the detector wirelessly.

IR-remote control for users

Reference code
350-41934

IR remote control for users

Reference code
350-41935

Related products

Outdoor motion detector, 180°, 230 V, 16 m

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Outdoor motion detector, 180°, 230 V, 13 m, black

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Outdoor motion detector, 180°, 230 V, 16 m, with orientable lens

One-channel outdoor motion detector for use along driveways, in gardens, ... Provided with an integrated light sensor. Automatically on or manually on via a NC push button (230 V) (to be ordered separately). Automatically off after switch-off delay. Provided with a rotatable motion sensor. The detection area can be subdivided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Favorites ( 0 )