! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Flat presence or absence detector with 3 zone DALI daylight control, 12 m, slave, for flush mounting

This presence detector (DALI daylight control, slave) is suitable for flush mounting in ceilings and can only be used in combination with the master (350-41657, 350-41650 and 350-41680) to increase its detection range. The detector has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. The device follows the settings of the master. The sensitivity of the slave, though, can be set separately. A maximum of ten slaves can be connected per master.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Flat presence or absence detector 360°, 12 m, with 3 zone DALI daylight control, slave, for flush mounting, (white)

Reference code
350-41659

This presence detector (DALI daylight control, slave) is suitable for flush-mounting in ceilings with a height of 2.4 – 3 m and can only be used in combination with the master (350-41657) to increase its detection range. The detector has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. The device follows the settings of the master. The sensitivity of the slave, though, can be set separately. A maximum of ten slaves can be connected per master.

Finishing colour: white

Specification description

Flat presence or absence detector 360°, 12 m, with 3 zone DALI daylight control, slave, for flush mounting, (white).

Technical data

  • Input voltage: via DALI bus
  • Detection angle: 360 °
  • Detection range (PIR): up to 12 m in diameter from a height of 3 m
  • Ambient temperature: 5 – 40 °C
  • Mounting method: flush-mounting
  • Drill diameter: 77 mm
  • Mounting height: 2,4 – 3 m
  • Dimensions (HxWxD): 95 x 95 x 95 mm
  • Protection degree: IP20
  • Marking: CE

Accessories

Technical datasheets
Technical manuals

IR-remote control for users

Reference code
350-41934

Universal remote control for smartphone

Reference code
350-41936

The universal remote control is used for the configuration of detectors via a smartphone app. The Niko Sensor Tool app is used to define settings and configuration and the universal remote control transmits the settings and configuration from the smartphone to the detector wirelessly.

Related products

Thermostat

The thermostat can be installed in any room fitted with underfloor heating, a radiator, heating unit or cooling unit. It controls the heating or cooling for the room in which it is mounted. The thermostat is used in combination with the heating or cooling module. You can also connect this to a three-fold or six-fold switching module for switching electric heating in Niko Home Control 2.0. As Niko Home Control controls the heating or cooling in different rooms, the resident can considerably save energy by linking the thermostat, for example, to the eco-function (all-off) or calendar-based functions (contrary to maintaining a fixed temperature throughout when using thermostatic taps, for instance).

Mini presence detector, 360°, Niko Home Control, 9 m

The mini detector detects movement and changes in light intensity. Using this information various Niko Home Control actions can be activated or deactivated. The product is suitable for ceiling mounting in suspended ceilings, both indoors and outdoors.

Outdoor motion detector, 180°, 230 V, 16 m

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Favorites ( 0 )