! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Flat presence or absence detector with 3 zone DALI daylight control, 12 m, secondary, for flush mounting

This presence detector (DALI daylight control, secondary detector) is suitable for flush mounting in ceilings and can only be used in combination with the master (350-41657, 350-41650 and 350-41680) to increase its detection range. The detector has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. The device follows the settings of the master. The sensitivity of the secondary detector, though, can be set separately. A maximum of ten secondary detectors can be connected per master.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Flat presence or absence detector 360°, 12 m, with 3 zone DALI daylight control, slave, for flush mounting, (white)

Reference code
350-41659

This presence detector (DALI daylight control, slave) is suitable for flush-mounting in ceilings with a height of 2.4 – 3 m and can only be used in combination with the master (350-41657) to increase its detection range. The detector has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. The device follows the settings of the master. The sensitivity of the slave, though, can be set separately. A maximum of ten slaves can be connected per master.

Finishing colour: white

Specification description

Flat presence or absence detector 360°, 12 m, with 3 zone DALI daylight control, slave, for flush mounting, (white).

  • Input voltage: via the DALI bus
  • Detector output: DALI
  • Detection angle: 360 °
  • Detection range (PIR): ø 12 m from a height of 3 m
  • Ambient temperature: -5 – +40 °C
  • Mounting method: flush-mounting
  • Drill diameter: 77 mm
  • Mounting height: 24 – 3 m
  • Dimensions (HxWxD): 95 x 95 x 95 mm
  • Protection degree: IP20
  • Marking: CE

Accessories

Technical datasheets
Technical manuals
Certificaten CE-Marking

Universal remote control for smartphone

Reference code
350-41936

The universal remote control is used for the configuration of detectors via a smartphone app. The Niko Sensor Tool app is used to define settings and configuration and the universal remote control transmits the settings and configuration from the smartphone to the detector wirelessly.

Specification description

Universal remote control for smartphone

Technical datasheets
Technical manuals
Certificaten CE-Marking

IR-remote control for users

Reference code
350-41934

Specification description

IR-remote control for users

Related products

Wall motion detector, 180°, Niko Home Control, 9 m

This motion detector is suitable for indoor use only. Niko Home Control supplies power to the motion detector. No additional power supply is required. To be used as a motion detector or as a motion detector in combination with a photo cell.

Outdoor motion detector, 180°, 230 V, 16 m

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Outdoor motion detector, 180°, 230 V, 13 m, black

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Favorites ( 0 )