Flat presence or absence detector 360°, 12 m, with 3-zone DALI daylight control, secondary, for flush mounting
This presence detector (DALI daylight control, secondary detector) is suitable for flush mounting in ceilings and can only be used in combination with the master (350-41657, 350-41650 and 350-41680) to increase its detection range. The detector has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. The device follows the settings of the master. The sensitivity of the secondary detector, though, can be set separately. A maximum of ten secondary detectors can be connected per master.
Product details
Flat presence or absence detector 360°, 12 m, with 3-zone DALI daylight control, secondary, for flush mounting, white
This presence detector (DALI daylight control, secondary) is suitable for flush-mounting in ceilings with a height of 2.4 – 3 m and can only be used in combination with a master to increase its detection range. The detector has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. The device follows the settings of the master. The sensitivity of the secondary detector, though, can be set separately. A maximum of ten secondary detectors can be connected per master.
Finishing colour: white
Compatible master detectors: 350-41650, 350-41657, 350-41680
Specification description
Flat presence or absence detector 360°, 12 m, with 3-zone DALI daylight control, secondary, for flush mounting, white.
- Input voltage: via the DALI bus
- Detector output: DALI
- Detection angle: 360 °
- Detection range (PIR): ø 12 m from a height of 3 m
- Ambient temperature: -5 – +40 °C
- Mounting method: flush-mounting
- Drill diameter: 77 mm
- Mounting height: 2.5 – 3 m
- Dimensions (HxWxD): 95 x 95 x 95 mm
- Dimensions visible (HxWxD): 95 x 95 x 5 mm
- Protection degree: IP20
- Marking: CE
Accessories
Universal remote control for smartphone
The universal remote control is used for the configuration of detectors via a smartphone app. The Niko detector tool IR app is used to define settings and configuration and the universal remote control transmits the settings and configuration from the smartphone to the detector wirelessly.
Compatible articles: 350-20056, 350-20070, 350-20072, 350-20078, 350-20080, 350-20082, 350-20085, 350-41600, 350-41620, 350-41650, 350-41657, 350-41659, 350-41680, 350-41750, 350-41751, 350-41752, 350-41753, 350-41760, 350-41761, 350-41762, 350-41763, 350-41780, 350-41781, 351-25050, 351-25065, 351-25340, 351-25451, 351-25457, 351-25463, 351-25467, 351-25475, 351-26450, 351-26470, 351-26480, 351-26560, 351-26562, 351-26570, 351-26572
Specification description
Universal remote control for smartphone
IR-remote control for installers
With the IR remote control all DALI addressable detectors can be controlled and configured.
Compatible articles: 350-41600, 350-41620, 350-41650, 350-41657, 350-41659, 350-41680, 350-41750, 350-41751, 350-41752, 350-41753, 350-41760, 350-41761, 350-41762, 350-41763, 350-41780, 350-41781
Specification description
IR-remote control for installers
Related products
Outdoor motion detector 200°, 230 V, 14 m
This outdoor motion detector with a detection range of 14 metres is suitable for use along driveways, under carports or in the garden. The motion detector can be mounted onto the ceiling or the wall and can be aimed upwards, downwards, left and right. The device has a built-in light sensor and switches the lighting automatically. After the pre-set time delay, the light is switched off automatically. The detector can be configured both manually and by remote control.
Outdoor motion detector 180°, 16 m, 230 V, 1 kanal, 10 A, IP54
The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.
Outdoor motion detector 180°, 230 V, 1 channel, 10 A, 13 m, IP54
The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.
