Detector with 3 zone DALI daylight control and extra functionalities, 360°, 24 m, slave, for flush mounting

Description

This presence detector (DALI daylight control, slave) is suitable for flush-mounting in ceilings with a height of 2.4 – 3 m and can only be used in combination with the master (350-41750) to increase its detection range. The device follows the settings of the master. The sensitivity of the slave, though, can be set separately. A maximum of ten slaves can be connected per master.

Finishing colour: white.

Specification description

Detector 360°, 24 m, with 3 zone DALI daylight control and extra functionalities, slave, for flush mounting, (white). The presence detector (DALI daylight control, slave) can considerably increase the detection area of the master. The 360° detection range can be divided into three zones of 120° each, which can be set or disconnected separately. The device follows the settings of the master. The sensitivity of the slave, though, can be set separately. A maximum of ten slaves can be connected per master.

• Input voltage: via DALI bus
• Detection angle: 360 °
• Detection range (PIR): up to 24 m in diameter from a height of 3 m
• Ambient temperature: -5 – 50 °C
• Mounting method: flush-mounting
• Drill diameter: 88.5 mm
• Mounting height: 2 – 3.4 m
• Wire capacity: All connection terminals can contain up to 2.5 mm² of wire.
• Dimensions (HxWxD): 100 x 100 x 136.4 mm
• Protection degree: IP54
• Marking: CE