Thanks to Niko Home Control, you can now also monitor your heating, cooling and hot water from one central location. You can control all essential heating system functions, and do this remotely too.
Your living room is used at different times from your kitchen or bathroom. After school, your children may play or study in their bedrooms. With Niko Home Control, you heat each room in your home only when it's necessary.
Connect your heating to Niko Home Control
To control your Niko Home Control partner brand’s heating system, you will need a smart device from that particular partner. More information can be found in the technical details.
The connection to such devices can be activated on mynikohomecontrol.niko.eu. Once activated, your Niko Home Control installation will start to communicate with your partner system and you will also be able to create advanced actions.
Niko makes every effort to ensure the connection process runs as smoothly as possible. Due to technical differences between the brands, there may be differences in functions and options.
Heating with NIBE, Mitsubishi Electric, Vaillant, Bulex, Saunier Duval, Portherm, Aldes, Danfoss and DAIKIN
Which devices?
Heat pumps and ventilation units, as long as these are compatible with NIBE uplink systems
You will need the following
- Niko Home Control with the most recent programming software
- NIBE Uplink system
Conditions
- Internet connection for both your Niko Home Control and your heating system (wired or wireless)
- to control the heating system in the mobile app/touchscreen, you must activate it via mynikohomecontrol.niko.eu. You can do this by entering the user account (username and password) as created by the partner.
Which devices?
Mitsubishi Electric heat pumps (air/air and air/water) or Mitsubishi Electric airco systems with a Wi-Fi adapter for an Internet connection. Systems compatible with MELCloud.
You will need the following
- Niko Home Control with the most recent programming software
- Mitsubishi Electric heat pump system or Mitsubishi Electric airco system with Wi-Fi adapter for Internet communication
Conditions
- Internet connection for both your Niko Home Control and your heating system (wired or wireless)
- to control the heating system in the mobile app/touchscreen, you must activate it via mynikohomecontrol.niko.eu. You can do this by entering the user account (username and password) as created on the MELCloud platform from Mitsubishi Electric.
Which devices?
vSMART or eRELAX thermostat in combination with a Vaillant boiler equipped with an eBUS connection.
You will need the following
- Niko Home Control with the most recent programming software
- a Vaillant boiler, equipped with an eBUS connection (from 2006 onwards) in combination with a Vaillant vSMART or eRELAX thermostat
Conditions
- Internet connection for both your Niko Home Control and your heating system (wired or wireless)
- to control the heating system in the mobile app/touchscreen, you must activate it via mynikohomecontrol.niko.eu. You can activate it by entering your vSMART serial number.
Which devices?
A MiGo thermostat in combination with a Bulex boiler equipped with an eBUS connection (except Thema TEK and Thema CLASSIC).
You will need the following
- Niko Home Control with the most recent programming software
- A Bulex boiler, equipped with an eBUS connection, in combination with a MiGo thermostat. The MiGo thermostat is compatible with all Bulex boilers with an eBUS connection (except Thema Tek and Thema Classic).
Conditions
- Internet connection for both your Niko Home Control and your heating system (wired or wireless)
- to control the heating system in the mobile app/touchscreen, you must activate it via mynikohomecontrol.niko.eu. You can activate it by entering your MiGo thermostat serial number.
Which devices?
A MiGo thermostat in combination with a Saunier Duval boiler equipped with an eBUS connection (except Thema TEK and Thema CLASSIC).
You will need the following
- Niko Home Control with the most recent programming software
- A Saunier Duval boiler, equipped with an eBUS connection, in combination with a MiGo thermostat. The MiGo thermostat is compatible with all Saunier Duval boilers with an eBUS connection (except Thema Tek and Thema Classic).
Conditions
Conditions
- Internet connection for both your Niko Home Control and your heating system (wired or wireless)
- to control the heating system in the mobile app/touchscreen, you must activate it via mynikohomecontrol.niko.eu. You can activate it by entering your MiGo thermostat serial number.
Which devices?
- Daikin Altherma air to water heat pump,
- Daikin residential air to air heat pump system (split/multi split airconditioning system),
- Daikin Altherma Gas boiler
in combination with the Daikin residential controller
You will need the following
- Niko Home Control with the most recent programming software
- A Daikin Heating/Cooling system equipped with a network gateway (wired or wireless LAN adapter) for internet connection.
Conditions
- Internet connection for both your Niko Home Control and your heating system
- To control the heating system in the mobile app/touchscreen, you must activate it via mynikohomecontrol.niko.eu. You can do this by entering the user account (username and password) as created by the partner
Which devices?
A MiGo thermostat in combination with a Protherm boiler equipped with an eBUS connection (except Thema TEK and Thema CLASSIC).
You will need the following
- Niko Home Control with the most recent programming software
- A Protherm boiler, equipped with an eBUS connection, in combination with a MiGo thermostat. The MiGo thermostat is compatible with all Protherm boilers with an eBUS connection (except Thema Tek and Thema Classic).
Conditions
- Internet connection for both your Niko Home Control and your heating system (wired or wireless)
- to control the heating system in the mobile app/touchscreen, you must activate it via mynikohomecontrol.niko.eu. You can activate it by entering your MiGo thermostat serial number.
Which devices?
It is a fully installed Danfoss 24V Icon system (wireless or wired) for hydronic floor heating systems. It has a Danfoss Icon ZigBee module that connects to Niko Home Control.
You will need the following
- Niko Home Control for traditional wiring (equiped with wireless smart hub) having the most recent programming software (version 2.12 onwards)
Conditions
- Internet connection for your Niko Home Control system
Which devices?
Aldes heat Pump: ( T.One® AIR , T.One® AquaAIR)
and/or
Aldes thermodynamic water heater with exhaust ventilation : (T.Flow® Hygro+, T.Flow® Nano)
- Niko Home Control having the most recent programming software (version 2.13 onwards)
Conditions
- Internet connection for both your Niko Home Control and your heating system (wired or wireless)
- To control the ventilation system in the mobile app/touchscreen, you must activate it via mynikohomecontrol.niko.eu. You can do this by entering the user account (username and password) as created by the partner
Partners Brochure
Read all about our partners
How to set up?
Find out what you need and how you can link Niko Home Control with your application
Online catalogue
Technical product information for professionals
