! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

DIN rail power supply for LED strips, 24 Vdc - 100 W

The power supply is suitable for powering LEDs and is designed for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety

Produktdetaljer

Dette produkt består af flere komponenter. Herunder er en oversigt over de forskellige komponenter.
Brugervejledning
Overensstemmelseserklæring

Modular power supply 24 V DC, 100 W

Typenr.
340-00051
EAN nummer
5413736349834

This power supply is suitable for powering LEDs and is designed for DIN-rail mounting. It has a power supply of 100 W. This power supply conforms to the European directive for EMC and safety.

Specifikationer

Modular power supply 24 V DC, 100 W.

  • Maksimal belastning: 100 W
  • Primær kabelforbindelse: dobbelt primær klemmeforbindelse: 1 x 2,5 mm² eller 2 x 1,5 mm² pr. skrueklemme
  • Sekundær kabeltilslutning: Firedobbelt sekundær klemmeforbindelse: 1 x 2,5 mm² eller 2 x 1,5 mm² pr. skrueklemme
  • Kaplingsklasse: IP20
  • Sikkerhedsbeskyttelse: selvnulstillende, indbygget beskyttelse mod kortslutning, overbelastning og overophedning
  • Beskyttelsesklasse: Klasse II-enhed: • SELV (sikkerhedskredsløb med ekstra lav spænding)
  • Anvendelse: kun til indendørs brug
  • DIN dimensioner: DIN 4TE
  • Dimensioner (HxBxD): 90 x 70 x 55 mm
  • Godkendelse: CE

Relaterede produkter

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50W per channel for 12Vdc LED strips and of 100W per channel for 24Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in 4-button mode (article numbers 410-00002 + xxx-90002) for controlling the colour LED strips. Replaces 340-00120 & 340-00121

DIN rail power supply for LED strips, 24 Vdc - 60 W

The 60W power supply is suitable for powering LEDs and is designed for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety.

Favoritter ( 0 )