Niko flush-mounting switch receiver with single controller of the RF system - io-homecontrol®, cream

This flush-mounting switch receiver with single controller is used for switching a lighting circuit (max. 500W). The switch receiver contains a changeover contact so that it can also replace a two-way switch. This product is part of the wireless system io-homecontrol®. Transmission of the signals occurs via radio waves between 868MHz and 870MHz. Only products that do not transmit continuously are permitted between these frequencies; this ensures that there is no interference. This receiver is ideal for new construction as well as for renovations. Each controller can control an unlimited number of receivers simultaneously. Each receiver can be controlled by up to 16 controllers. All parts simply click together. Each controller can be finished with surround plates from the Niko range. The controller mechanism is equipped with a programming key so the system can be programmed and reprogrammed without drilling or channelling work.

Niko flush-mounting switch receiver with single controller of the RF system - io-homecontrol®, cream

This Niko flush-mounting receiver (switch receiver) with single controller is a 1-channel switch for a lighting circuit (max. 500W). The switch receiver contains a changeover contact so that it can also replace a two-way switch. The product is part of the RF (Radio Frequency) system, io-homecontrol®, a wireless installation technique between the control points (switches) and the receivers to be operated. Transmission occurs via radio waves between 868MHz and 870MHz. Only products that do not transmit continuously are permitted between these frequencies; this ensures that there is no interference. As a result, the commands sent will always arrive securely at the receiver and vice versa. This receiver is ideal for new construction as well as for renovations. Each controller can control an unlimited number of receivers simultaneously. Each receiver can be controlled by up to 16 controllers.

The package contains:

- aluminium socket

- control mechanism

- finishing set

- user manual

The controller parts simply click together. Each controller can be finished with surround plates from the Niko range. The controller is pre-programmed and linked to the receiver via its rear side. The controller mechanism is equipped with a programming key. This key is hidden by the finishing set but ensures that the system can be programmed and reprogrammed using the controller without drilling or channelling work.

• Marking: CE